Skip to Main Content
Calicut University • BBA Semester 6 • BBA6CJ305

Total Quality Management Notes

Excellence in customer satisfaction.

Curated by Hadi (Kozhikode) (BBA Academic Contributor)•Last updated: November 2026•Based on Calicut University FYUGP Regulations

Chapter-Wise Module Notes & PDF Downloads

Short Notes

All Modules Included

Complete syllabus revision notes covering all modules in one single PDF

Module 1

Introduction to Quality & TQM Philosophies

Module 2

The Seven Basic Quality Tools & Problem Solving

Module 3

Six Sigma DMAIC Methodology & Process Capability

Module 4

Continuous Improvement: Kaizen, 5S & TPM

Interactive Reading Experience

Read Module Notes Online

Module I: Foundations of Total Quality Management & Core Philosophies

Total Quality Management (TQM) is an enterprise-wide management philosophy aimed at the continuous improvement of products, services, processes, and organizational culture to deliver superior customer satisfaction. Originating in post-World War II Japanese manufacturing reconstruction and rapidly adopted across global aerospace, automotive, healthcare, and financial services, TQM represents a fundamental departure from traditional retrospective quality inspection toward proactive, systemic prevention of defects.

1.1 Concept, Meaning, and Evolution of Quality

The definition of quality has evolved through four major historical epochs:

  1. Inspection Era (1900s–1930s): Retrospective sorting of completed finished goods; discarding or reworking defective items at the end of the factory line. Highly wasteful.
  2. Statistical Quality Control - SQC (1930s–1950s): Walter Shewhart introduced statistical sampling and control charts to monitor process variation during manufacturing.
  3. Quality Assurance - QA (1950s–1980s): Systemic focus on engineering design, reliability testing, and standard operating procedures to prevent defects before production begins.
  4. Total Quality Management - TQM (1980s–Present): Holistic, organization-wide commitment involving every employee from the CEO to the shop-floor line worker, centered on customer delight, process optimization, and continuous learning.

1.2 Dimensions of Quality: Product vs. Service

Quality manifests differently in physical manufacturing versus intangible service delivery:

1.2.1 David Garvin's 8 Dimensions of Product Quality

  • Performance: Primary operating characteristics of the product (e.g., automobile acceleration, fuel efficiency).
  • Features: Secondary characteristics that supplement basic functioning (e.g., heated leather seats, lane-assist cameras).
  • Reliability: Probability that a product will not malfunction or fail within a specified time period (Mean Time Between Failures - MTBF).
  • Conformance: The degree to which a product's design and operating characteristics meet established engineering standards and tolerances.
  • Durability: Amount of use one gets from a product before it deteriorates completely (product economic life).
  • Serviceability: Speed, courtesy, competence, and ease of repair when maintenance is required.
  • Aesthetics: How a product looks, feels, sounds, tastes, or smells (subjective sensory appeal).
  • Perceived Quality: Brand reputation, prestigious advertising imagery, and customer trust.

1.2.2 The SERVQUAL Dimensions of Service Quality (Parasuraman, Zeithaml & Berry)

  • Tangibles: Physical facilities, modern equipment, and clean appearance of service personnel.
  • Reliability: Delivering promised service dependably, accurately, and on schedule.
  • Responsiveness: Willingness to help customers and provide prompt, enthusiastic service.
  • Assurance: Knowledge, competence, and courtesy of employees and their ability to inspire trust and confidence.
  • Empathy: Caring, individualized, compassionate attention provided to individual clients.

1.3 Foundational Philosophies of Quality Gurus

1.3.1 W. Edwards Deming

Deming emphasized that 85% to 94% of quality failures stem from the system, not the workers. He formulated the famous 14 Points for Management, encompassing: create constancy of purpose; cease dependence on mass inspection; drive out fear; break down barriers between departments; eliminate numerical quotas; and institute vigorous training and leadership. Deming also popularized the Plan-Do-Check-Act (PDCA) Cycle.

1.3.2 Joseph M. Juran

Juran defined quality pragmatically as "Fitness for Use." He formulated the Juran Trilogy, asserting that managing for quality requires three managerial processes:

  • Quality Planning: Identifying customers, determining their needs, developing products responding to those needs, and establishing processes capable of producing the product.
  • Quality Control: Operating the process under real conditions, evaluating actual performance, and taking corrective action on the sporadic spike in defects.
  • Quality Improvement: Breakthrough chronic defect elimination by institutionalizing quality councils and dedicated project teams.

1.3.3 Philip B. Crosby

Crosby defined quality as "Conformance to Requirements." In his influential work Quality is Free, he established the Four Absolutes of Quality Management:

  1. Quality is defined as conformance to requirements, not as goodness or luxury.
  2. The system of quality is prevention, not appraisal.
  3. The performance standard must be Zero Defects, not "that's close enough."
  4. The measurement of quality is the Price of Non-Conformance (PONC), not arbitrary indexes.

Calicut University FYUGP Academic Framework

Course CodeBBA6CJ305
Credits4 Credits (75h)
Internal (CIE)30 Marks
End-Sem (ESE)70 Marks

Syllabus details for BBA Semester 6 under official Calicut University regulations.

Assessment comprises a 70-mark End-Semester Examination (2 Hours) and 30-mark Continuous Internal Evaluation.

About Total Quality Management (Calicut University BBA Sem 6)

Total Quality Management (BBA6CJ305 • 4 Credits • 75 Hours) is an essential quality engineering, process excellence, and operations management core paper in Calicut University BBA Semester 6 under the FYUGP curriculum. Designed to build systematic continuous improvement capabilities, defect reduction methodologies, and quality assurance mastery for graduating management executives, the course explores the philosophies, quantitative tools, statistical methodologies, and institutional standards that govern quality in world-class manufacturing and service enterprises. The academic curriculum covers the philosophical and operational paradigms established by international quality pioneers: W. Edwards Deming (the 14 Points for Management, PDCA Plan-Do-Check-Act cycle), Joseph M. Juran (the Juran Quality Trilogy: Quality Planning, Quality Control, Quality Improvement), Philip B. Crosby (the Zero Defects philosophy, Four Absolutes of Quality, Cost of Quality: prevention, appraisal, internal and external failure costs), Kaoru Ishikawa, and Armand Feigenbaum. Undergraduates master the Seven Basic Quality Tools (Ishikawa fishbone diagram, Pareto chart, check sheet, histogram, scatter diagram, control chart, stratification) used for root-cause analysis and defect reduction. The course provides deep practical instruction in Six Sigma DMAIC methodology (Define, Measure, Analyze, Improve, Control), process capability indices, Kaizen continuous improvement, 5S workplace organization, Total Productive Maintenance (TPM), and Quality Function Deployment (QFD / House of Quality). Furthermore, students examine institutional quality certifications, specifically the ISO 9000 quality management system standards and international quality awards (Deming Prize, Malcolm Baldrige National Quality Award) evaluated in university examinations through rigorous analytical and process improvement questions.

Total Quality Management Module-by-Module Curriculum Breakdown

Official syllabus unit modules prescribed by the Calicut University FYUGP framework:

Module I

Introduction to Quality & TQM Philosophies

Establishes foundational concepts, evolution, and theoretical frameworks of Total Quality Management. Topics include defining quality (fitness for use, conformance to specifications, exceeding customer expectations); dimensions of quality for manufactured products (performance, features, reliability, conformance, durability, serviceability, aesthetics, perceived quality) and services (tangibles, reliability, responsiveness, assurance, empathy); evolution of quality management from inspection and quality control to quality assurance and TQM; core TQM principles: customer focus, leadership, employee empowerment, process approach, and continuous improvement; and major quality philosophies: W. Edwards Deming's 14 Points for Management and the PDCA cycle, Joseph Juran's Quality Trilogy, Philip Crosby's Zero Defects and Cost of Quality (prevention, appraisal, internal failure, external failure costs), and Kaoru Ishikawa's company-wide quality control.

Module II

The Seven Basic Quality Tools & Problem Solving

Delivers comprehensive operational training in the seven foundational statistical and visual tools for process problem-solving. Topics include Ishikawa Cause-and-Effect Diagram (Fishbone / 6M diagram: Man, Machine, Method, Material, Measurement, Mother Nature / Environment; methodology for root-cause identification); Pareto Chart (80/20 rule, constructing cumulative percentage curves to prioritize vital few from trivial many defects); Check Sheets for data recording; Histograms for frequency distribution visualization; Scatter Diagrams for bivariate correlation analysis; Process Stratification; and Statistical Process Control Charts (monitoring process stability); and standard 7-step problem-solving methodologies.

Module III

Six Sigma DMAIC Methodology & Process Capability

Covers the data-driven Six Sigma quality improvement framework and statistical process capability analysis. Topics include defining Six Sigma (philosophy, metric: 3.4 defects per million opportunities - DPMO); Six Sigma organization hierarchy (Champion, Master Black Belt, Black Belt, Green Belt, Yellow Belt); the 5-phase DMAIC improvement cycle: Define (Project Charter, Voice of Customer - VOC, SIPOC map), Measure (data collection plan, process baseline, calculating DPU and DPMO), Analyze (root-cause analysis, hypothesis testing, failure mode and effects analysis - FMEA), Improve (generating and implementing process solutions), and Control (standard operating procedures, control plans); and Process Capability analysis: calculating and interpreting Cp (potential capability) and Cpk (actual process capability index considering process centering).

Module IV

Continuous Improvement: Kaizen, 5S & TPM

Examines Japanese continuous process improvement philosophies and workplace organization systems. Topics include Kaizen philosophy (continuous incremental improvements, PDCA cycle, gemba walks); 5S workplace organization methodology: Seiri (Sort), Seiton (Set in order), Seiso (Shine), Seiketsu (Standardize), and Shitsuke (Sustain); Quality Function Deployment (QFD: translating Voice of Customer into engineering parameters, constructing the House of Quality matrix); Total Productive Maintenance (TPM: autonomous maintenance, overall equipment effectiveness - OEE calculation); Benchmarking (types: competitive, functional, internal; benchmarking process steps); and employee empowerment through Quality Circles (structure, operation, problem-solving benefits).

Module V

Quality Management Systems & ISO 9000 Certification

Focuses on international quality standards, auditing processes, and global quality excellence awards. Topics include Quality Management Systems (QMS); the ISO 9000 family of standards: ISO 9000 (fundamentals and vocabulary), ISO 9001 (requirements for certification: context of organization, leadership, planning, support, operation, performance evaluation, improvement), and ISO 9004; the ISO 9001 certification and surveillance audit process; quality documentation hierarchy (quality policy, quality manual, standard operating procedures - SOPs, work instructions, quality records); internal quality audits; and National and International Quality Awards: the Deming Application Prize (Japan), Malcolm Baldrige National Quality Award (USA), European Quality Award (EFQM), and Golden Peacock Quality Awards (India).

Core Curriculum & Key Topics

  • Definitions of Quality: fitness for use (Juran), conformance to requirements (Crosby), and customer delight
  • Cost of Quality (COQ): Prevention costs, Appraisal costs, Internal Failure costs, and External Failure costs
  • Quality Gurus: W. Edwards Deming (14 Points for Management, PDCA cycle), Joseph Juran (Quality Trilogy: Planning, Control, Improvement), and Philip Crosby (Zero Defects)
  • The Seven Traditional QC Tools: Check Sheets, Histograms, Pareto Analysis (80/20 rule), Ishikawa Fishbone Diagram, Scatter Plots, Stratification, and Shewhart Control Charts
  • Quality Function Deployment (QFD): translating Voice of Customer into engineering specifications via the House of Quality
  • Japanese manufacturing philosophies: Kaizen (continuous incremental improvement), 5S framework (Sort, Set in order, Shine, Standardize, Sustain), and Poka-Yoke (fail-safe mechanisms)
  • Six Sigma framework: statistical definition (3.4 defects per million opportunities - DPMO), DMAIC cycle (Define, Measure, Analyze, Improve, Control)
  • Quality standards: ISO 9001:2015 certification requirements, Malcolm Baldrige National Quality Award, and Deming Prize criteria

Learning Outcomes

  • Construct and interpret the Seven Basic QC Tools (Ishikawa diagrams, Pareto charts) to diagnose manufacturing defects.
  • Apply the Six Sigma DMAIC sequence to systematically improve operational process capability.
  • Design Quality Function Deployment (House of Quality) matrices translating customer expectations into technical specifications.
  • Implement Kaizen and 5S workplace organization principles to reduce production waste and enhance safety.

Calicut University Examination Scheme for Total Quality Management

The evaluation framework for Total Quality Management (BBA6CJ305) under Calicut University FYUGP regulations combines Continuous Internal Evaluation (30 Marks) with the university End-Semester Examination (70 Marks) for a total of 100 Marks (2 Hours duration):

Part A: Conceptual Questions

10 Questions × 3 Marks (Maximum ceiling 24 Marks). Short definitional and conceptual questions covering all 4 syllabus modules.

Part B: Analytical Problems

8 Questions × 6 Marks (Maximum ceiling 36 Marks). Paragraph questions, comparative evaluations, and analytical problems.

Part C: Comprehensive Essays

2 Questions × 10 Marks (Answer any 1 for 10 Marks). Long-form essay or comprehensive numerical workout problem.

Exam Preparation Strategy:

To excel in Calicut University Total Quality Management (BBA6CJ305) examinations: • In Part A: Define quality concepts with academic precision citing original quality gurus (e.g. cite W. Edwards Deming for 14 Points and PDCA, Joseph Juran for the Quality Trilogy, Philip Crosby for Zero Defects and 4 Absolutes of Quality, and Armand Feigenbaum for Total Quality Control). State the Six Sigma defect rate: 3.4 DPMO. • In Part B: Always illustrate quality tools with clear hand-drawn diagrams. For the Ishikawa Cause-and-Effect Diagram, draw the fishbone spine with a box at the head labeled 'Problem / Defect', and draw the 6 main ribs clearly labeled: Manpower, Machinery, Methods, Materials, Measurement, and Milieu/Environment, adding secondary causes. For the Deming Cycle, draw the PDCA circle (Plan -> Do -> Check -> Act). • In Part C (Comprehensive 15-Mark Essays): In essays on Six Sigma DMAIC or TQM Gurus, structure your answer into four distinct sections: (1) Philosophical and Theoretical Foundations, (2) Detailed Phase-by-Phase Operational Methodology (e.g. detailing Define, Measure, Analyze, Improve, and Control with specific tools used in each phase), (3) Hand-drawn Process Diagrams and Metrics (e.g. SIPOC map or House of Quality matrix), and (4) Real-World Manufacturing or Service Case Study (e.g. Toyota Production System, Motorola Six Sigma, or GE quality transformations). Allocate 25 minutes to Part A, 50 minutes to Part B, and 75 minutes to Part C.

Exam Preparation & Study Guides — Total Quality Management

What are the four categories of the Cost of Quality (COQ)?

COQ comprises: (1) Prevention Costs (preventing defects through employee training and quality planning), (2) Appraisal Costs (inspecting and testing materials and products), (3) Internal Failure Costs (rework, scrap, and downtime before product shipment), and (4) External Failure Costs (warranty claims, customer complaints, and recalls after customer receipt).

How does the Six Sigma DMAIC methodology structure process improvement?

DMAIC follows five phases: (1) Define (clarify the problem and project goals), (2) Measure (collect baseline process data), (3) Analyze (identify root causes of defects), (4) Improve (implement and verify solutions), and (5) Control (institutionalize standardized procedures to maintain gains).

What is an Ishikawa (Fishbone) Diagram and how is it constructed?

An Ishikawa diagram is a visual brainstorming tool that maps all potential root causes of a quality problem (the 'head' of the fish). Causes are categorized along the 'bones' into major categories: Manpower, Machinery, Materials, Methods, Measurement, and Environment (Mother Nature).

What are the Seven Basic Quality Tools (7 QC Tools) formulated by Kaoru Ishikawa?

The 7 QC tools comprise: Check Sheets (structured data collection), Histograms (frequency distribution visualization), Pareto Charts (80/20 prioritization of defect causes), Cause-and-Effect / Fishbone Diagrams (root cause analysis), Scatter Diagrams (evaluating correlation between variables), Control Charts (monitoring statistical process stability), and Stratification / Flowcharts (isolating data subgroups and mapping processes).

How does the DMAIC cycle operate in Six Sigma quality improvement projects?

DMAIC is a rigorous, data-driven five-phase methodology: Define (clarify the business problem, customer requirements, and project charter goals), Measure (quantify the current process baseline and defect rate), Analyze (identify root causes using statistical tests), Improve (develop and pilot robust countermeasures), and Control (implement standard operating procedures and control charts to sustain gains).

What are the 5S principles in lean workplace organization and continuous improvement?

The 5S framework derives from Japanese manufacturing: Seiri (Sort - eliminate unnecessary workplace clutter), Seiton (Set in order - arrange necessary items systematically for easy access), Seiso (Shine - clean and inspect equipment daily), Seiketsu (Standardize - establish visual protocols to maintain cleanliness), and Shitsuke (Sustain - build workplace self-discipline and ongoing adherence through regular audits).

Academic Standards

Course outlines and study notes follow official Calicut University curricula. Curated by Hadi (Kozhikode).

For feedback or corrections, contact support@degreelive.in.

Related Study Resources & Student Support

Related Semester 6 Subjects

Browse study notes for other courses in BBA Sem 6:

Degree Scholarships

Financial Aid & Grants 2026-27

Check eligibility criteria and deadlines for Kerala government and merit scholarships (e-Grantz 3.0, KSHEC, DCE).

Explore All Scholarships

Request Notes

Can't find what you're looking for? Let us know which subject notes you need.

Submit Request